BACMAR products are designed for marine applications and are based on decades of experience. We focus on solutions for common problems. Whether it be corrosion problems, power problems or any of the numerous issues that can be the cause of worry for boat owners.


What is a Galvanic Isolator ?

A Galvanic Isolator is a device designed to block destructive current flow between a vessel and the submersed metals of other vessels and structures.

There are a number of ways that corrosion of submersed metals can occur on a vessel. One is via the earth wire of a shore power connection. The vessel's shore power earth wire is connected to the same shore 'earth' that other adjacent vessels are connect to. This creates a common connection between all vessels connected to that shore power system. This common connection can create an electrical path for current to flow between connected vessels, allowing the submersed metal components of those vessels to react with each other. The BACMAR galvanic isolator blocks that destructive current flow while maintaining the continuity of the vessel's safety 'Earth' wire.


The BACMAR sequential starter will overcome the problem of the shore mounted circuit breaker tripping as a result of all electrical equipment trying to restart at the same time when power is restored after an outage, again leaving the vessel with no AC power.

New Zealand law does not allow these devices to be installed by anyone other than a suitably trained and 'registered' electrician. Most 'marine' electricians in New Zealand are not qualified to work on shore power systems or to install or test this device.

THESE PRODUCTS COMPLIY WITH NEW ZEALAND ELECTRICITY REGULATIONS


Copyright © 1992 -   Barry J Clark. All rights reserved.

Barry Clark Marine provides corrosion testing and prevention. Warrant of electrical fitness inspection and testing.

Electrolysis and galvanic corrosion testing, protection and prevention.